Clares Micro Supplies

Application name Version Loads Dies Works Saves Faster Notes
BDFS Current N N N N N Does not recognise ADFS version
ProArtisan2 current Y N Y Y Y
ProArtisan24 1.12 Y N Y Y Y
Topographer 2D 1.00 Y N Y Y Y, very
Topographer 3D 1.00 Y N Y Y Y, very
Compo 1.10 Y N Y Y Y, very
WimpBASIC 1 1.12 Y N Y Y Y, very See below
WimpBASIC 2 2.08 Y N Y Y Y See below
WB1 Compd Apps Y N Y Y Depends on app. All worked fine with WB1 mods
WB2 Compd Apps Y N Y Y Depends on app. All worked fine with WB2 mods
Render Bender2 Current Y N Y Y Y, very Messed up windows when rendering
Schema 1.18 Y N Y Y Y, very
Schema2 Current Y N Y Y Y, very
Plot Current Y N Y Y Y, extremely
Rhapsody 2 Y N Y Y Y
Rhapsody 3 Y N Y Y Y
Rhapsody 4 latest Y N Y Y Unknown This is according to RISCOS Ltd
Virtualise 1.12 N N N N N/A Does not recognise ADFS version
Armadeus 1.00 Y N Y Y Y Not tested with Armadeus board, just the software
Artisan 1.06 Y Y N N N/A Gave an exception address. This software is very old!
Artisan 2 Last release N Y N N N/A Required hard reset. This software is very old!
Illusionist 1.92 Y N Y Y Y, very
Rhythm Bed 1.24 Y N Y Y Not noticeable Worked fine.
Serenade 1.12 Y N Y Y Could only test partially as I don't have a MIDI card.
AlphaBase Y N Y Y Y Worked in letterbox mode
Knowledge Organiser 1.00 N Y N N N/A Abort on data transfer
Knowledge Organiser 2 2.23 Y N Y Y Y
Titler 1.19 Y N Y Y Y
Sequencer 1.25 Y N Y Y Y
InterDictor2 Y N Y Y Y - extremely

BDFS is being fixed by Clares. It is possible that Virtualise will be getting updated for RISC OS 4, but at the moment, Clares are not making any firm decision (memory prices being as cheap as they are)

For WimpBasic1, WimpBasic2, Rhapsody4 and BDFS, you should de-install before changing the chips. Failure to do so could result in a loss of program credit and a return of your original disc back to Clares.

Any apps compiled with either WB1 or 2 will work with the relevant runtime modules.


Return to.....
  1. The main compatibility page